• Replacement standard magnetic feet for the MTS3000-Restan system.

    1-FEET

    1-FEET

    Package of replacement standard  magnetic feet of the MTS3000-Restan system

    Contents for package: 3 pieces.

    SKU: 1-FEET Category:
  • 1-EVAL/PRE

    1-EVAL/PRE

    USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PREMIUM Version) with USB protection key

    SKU: 1-EVAL/PRE Categories: ,
  • Drilling slide accessory for hole-drilling strain-gauge measurements using air turbine for internal pipes for the MTS3000-Restan system.

    1-SINT/SLIDE5

    1-SINT/SLIDE5

    Drilling slide of the MTS3000-Restan system using air turbine for internal pipes measurements.

    SKU: 1-SINT/SLIDE5 Categories: ,
  • HBK strain gage rosette with 3 grids, for hole drilling measurements 5.10mm, circular layout with soldering pads

    1-RY61-1.5/120S

    1-RY61-1.5/120S

    Package of HBK strain gage rosette for hole drilling measurements with 3 grids, circular layout with soldering pads

    Contents for package: 5 pieces.

    SKU: 1-RY61-1.5/120S Category:
  • Inverted cone diamond drill bit (small size) for the MTS3000-Restan system for the compressed air turbine.

    1-SINTD1/1

    1-SINTD1/1

    Package of inverted cone drill bits with diamond coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of small size

    SKU: 1-SINTD1/1 Category:
  • The 1-MX410B is 4 channels signal amplifier suitable for strain gage application.

    1-MX410B

    1-MX410B

    HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software

    The kit is composed by the HBK QuantumX MX410B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.

    SKU: 1-MX410B Category:
  • Basis control unit developed for the MTS3000 only for the manual version

    1-SINT/BOX

    1-SINT/BOX

    Basis control unit developed for the MTS3000 only for the manual version

    SKU: 1-SINT/BOX Categories: ,
  • Replacement centering endmill for the MTS3000-Restan system for the electric motor.

    1-SINTCTC/2

    1-SINTCTC/2

    Centering drill bit for the electric motor of the MTS3000-Restan system

    SKU: 1-SINTCTC/2 Category:
  • 1-SINTCTT4/4

    1-SINTCTT4/4

    Package of inverted cone endmills with coating for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for metallic materials

    SKU: 1-SINTCTT4/4 Category:
  • 1-EVAL/BASIC - Software for the calculation of the residual stress by the hole drilling method (BASIC version).

    1-EVAL/BASIC

    1-EVAL/BASIC

    USB Memory stick containing the EVAL 7 software for the calculation of the residual stress by the hole drilling method (BASIC version) with USB protection key

    SKU: 1-EVAL/BASIC Categories: ,
  • Manual Air Turbine Slide with Optical Microscope

    Entry-level cost-effective version of the MTS3000-Restan system with air turbine drilling slide and optical microscope for hole drilling residual stress measurements on metals

  • Small adaptation replacement chuck for the MTS3000-Restan system for the electric motor

    1-SINTCS/2

    1-SINTCS/2

    Adaptation chuck from 2.35mm to 1.60mm for the electric motor of the MTS3000-Restan system

    SKU: 1-SINTCS/2 Category:
  • Replacement strong magnetic feet for the MTS3000-Restan system.

    1-STRONGFEET

    1-STRONGFEET

    Package of replacement strong  magnetic feet of the MTS3000-Restan system

    SKU: 1-STRONGFEET Category:
  • Big adaptation replacement chuck for the MTS3000-Restan system for the electric motor.

    1-SINTCB/2

    1-SINTCB/2

    Adaptation chuck from 3.00mm to 2.35mm for the electric motor of the MTS3000-Restan system

    SKU: 1-SINTCB/2 Category:
  • NI9219 + cDAQ9181

    NI9219 + cDAQ9181

    National Instrument 4-channels Universal Analog Input Module with CompactDAQ Chassis (1 Slot, Ethernet connection). Fully automatic acquisition using the RSM software.

    Kit composed by the National Instrument acquisition board NI9219 (4 channels), cDAQ-9118 Ethernet chassis, 4 connection adapters (quarter bridge), power supply and accessories.

    SKU: NI9219 + cDAQ 9181 Category: