- Display 30 Products per page
-
1-MX1615B
HBK QuantumX 16-channel bridge amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX1615B amplifier (16 channels), 20 connectors (1-CON-S1015), power supply (1-NTX001) and accessories.
-
1-RY61-1.5/120S
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, circular layout with soldering pads
Contents for package: 5 pieces.
-
1-SINTD2/1
Package of inverted cone drill bits with diamond coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
1-SGCABLES-NI
Package of additional cables with quarter bridge completion for National Instrument NI9219 strain gage amplifier
Contents for package: 4 pieces
-
1-RY61-1.5/120R3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
1-SINT/NETBOOK-MTS
Netbook PC configured and costumized with the MTS3000-Restan system’s software (with accessories).
-
1-SINTCT1/1
Package of inverted cone endmills for the air turbine of the MTS3000-Restan system for strain gage rosettes of small size
-
FRS-3-23-1LJBT
Package of TML strain gage rosette for hole drilling measurements with 3 grids, circular layout with 3 wires connection cables (1.0 m)
Contents for package: 10 pieces.
-
1-SINTD1/1
Package of inverted cone drill bits with diamond coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of small size
-
LC-SG-120
Package of Low-Cost strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 2 wires connection cables (1.0 m)
Contents for package: 5 pieces.
-
1-EVAL/PRE
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PREMIUM Version) with USB protection key
-
1-SINTCTT4/4
Package of inverted cone endmills with coating for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for metallic materials
-
1-SINTCB/2
Adaptation chuck from 3.00mm to 2.35mm for the electric motor of the MTS3000-Restan system
-
FRS-2-11-1LJBT
Package of TML strain gage rosette for hole drilling measurements with 3 grids, circular layout with 3 wires connection cables (1.0 m)
Contents for package: 10 pieces.
-
1-SINT/SLIDE5
Drilling slide of the MTS3000-Restan system using air turbine for internal pipes measurements.
-
1-SINTCTT1/1
Package of inverted cone endmills with coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of small size
-
1-SINTCT2/2
Package of inverted cone endmills for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for polymeric and composite materials
-
1-SINT/SLIDE1
Drilling slide of the MTS3000-Restan system using air turbine high speed drilling for metal materials
-
FRS-3-11-1LJBT
Package of TML strain gage rosette for hole drilling measurements with 3 grids, circular layout with 3 wires connection cables (1.0 m)
Contents for package: 10 pieces.
-
NI9219 + cDAQ9181
National Instrument 4-channels Universal Analog Input Module with CompactDAQ Chassis (1 Slot, Ethernet connection). Fully automatic acquisition using the RSM software.
Kit composed by the National Instrument acquisition board NI9219 (4 channels), cDAQ-9118 Ethernet chassis, 4 connection adapters (quarter bridge), power supply and accessories.
-
1-SGCABLES-MX
Package of additional cables with quarter bridge completion for HBK QuantumX MX440B and MX840B strain gage amplifier
Contents for package: 4 pieces
-
1-SINTCS/2
Adaptation chuck from 2.35mm to 1.60mm for the electric motor of the MTS3000-Restan system
-
1-RY61-1.5/120K3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
1-SINTCTT2/4
Package of inverted cone endmills with coating for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for metallic materials
-
1-SGKIT
Strain gage installation kit including the required tools for the application of the strain gages for hole drilling measurments.
-
EA-06-031-RE120
Package of MM – Vishay strain gage rosette for hole drilling measurements with 3 grids, circular layout with soldering pads.
Contents for package: 5 pieces.