- Display 30 Products per page
-
Manual Air Turbine Slide with Optical Microscope
Entry-level cost-effective version of the MTS3000-Restan system with air turbine drilling slide and optical microscope for hole drilling residual stress measurements on metals
-
1-SINTCS/2
Adaptation chuck from 2.35mm to 1.60mm for the electric motor of the MTS3000-Restan system
-
1-SGCABLES-MX
Package of additional cables with quarter bridge completion for HBK QuantumX MX440B and MX840B strain gage amplifier
Contents for package: 4 pieces
-
1-RY61-1.5/120K3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
1-SINTCB/2
Adaptation chuck from 3.00mm to 2.35mm for the electric motor of the MTS3000-Restan system
-
1-MX440B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX440B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-SGKIT
Strain gage installation kit including the required tools for the application of the strain gages for hole drilling measurments.
-
1-EVAL/ULT
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (ULTIMATE version) with USB protection key
-
1-SINTCTT2/1
Package of inverted cone endmills with coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
1-MX1615B
HBK QuantumX 16-channel bridge amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX1615B amplifier (16 channels), 20 connectors (1-CON-S1015), power supply (1-NTX001) and accessories.
-
1-RY61-1.5/120R3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
1-RY61-1.5/120K
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 3soldering pads
Contents for package: 5 pieces.
-
Electric Motor for Polymers with Optical Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and optical microscope for hole drilling residual stress measurements on polymerics
-
1-SINTUP/LVDT
Upgrade of the MTS3000-Restan system using an LVDT sensor (with accessories and connection cables)
-
1-SINTCT2/1
Package of inverted cone endmills for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
LC-SG-120
Package of Low-Cost strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 2 wires connection cables (1.0 m)
Contents for package: 5 pieces.
-
1-EVAL/ENT
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (ENTERPRISE version) with USB protection key
-
Internal Pipe Air Turbine Slide with Digital Microscope
Automatic version of the MTS3000-Restan system with air turbine internal pipe drilling slide and digital microscope for hole drilling residual stress measurements on metallic materials
-
1-SGCABLES-NI
Package of additional cables with quarter bridge completion for National Instrument NI9219 strain gage amplifier
Contents for package: 4 pieces
-
1-MX410B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software
The kit is composed by the HBK QuantumX MX410B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-SINT/NETBOOK-MTS
Netbook PC configured and costumized with the MTS3000-Restan system’s software (with accessories).
-
1-FEET
Package of replacement standard magnetic feet of the MTS3000-Restan system
Contents for package: 3 pieces.
-
1-EVAL/PRO
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PROFESSIONAL version) with USB protection key
-
1-SINT/SLIDE3
Drilling slide of the MTS3000-Restan system using electric motor for composite materials
-
1-EVAL/BASIC
USB Memory stick containing the EVAL 7 software for the calculation of the residual stress by the hole drilling method (BASIC version) with USB protection key