- Display 30 Products per page
-
1-SINT/PC-MTS
Custom PC configured and costumized with the MTS3000-Restan system’s software (with accessories)
-
NI9219 + cDAQ9181
National Instrument 4-channels Universal Analog Input Module with CompactDAQ Chassis (1 Slot, Ethernet connection). Fully automatic acquisition using the RSM software.
Kit composed by the National Instrument acquisition board NI9219 (4 channels), cDAQ-9118 Ethernet chassis, 4 connection adapters (quarter bridge), power supply and accessories.
-
Manual Air Turbine Slide with Optical Microscope
Entry-level cost-effective version of the MTS3000-Restan system with air turbine drilling slide and optical microscope for hole drilling residual stress measurements on metals
-
1-EVAL/PRE
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PREMIUM Version) with USB protection key
-
1-SINT/NETBOOK-MTS
Netbook PC configured and costumized with the MTS3000-Restan system’s software (with accessories).
-
1-SINTCT1/1
Package of inverted cone endmills for the air turbine of the MTS3000-Restan system for strain gage rosettes of small size
-
1-SGCABLES-NI
Package of additional cables with quarter bridge completion for National Instrument NI9219 strain gage amplifier
Contents for package: 4 pieces
-
1-MX440B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX440B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-SINTCT2/1
Package of inverted cone endmills for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
1-MX840B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX840B amplifier (8 channels), 8 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-EVAL/ULT
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (ULTIMATE version) with USB protection key
-
1-SINTCTT2/1
Package of inverted cone endmills with coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
1-SGCABLES-MX
Package of additional cables with quarter bridge completion for HBK QuantumX MX440B and MX840B strain gage amplifier
Contents for package: 4 pieces
-
1-SGKIT
Strain gage installation kit including the required tools for the application of the strain gages for hole drilling measurments.
-
1-MX410B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software
The kit is composed by the HBK QuantumX MX410B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
Air Turbine Slide with Optical Microscope
Automatic version of the MTS3000-Restan system with air turbine drilling slide and optical microscope for hole drilling residual stress measurements on metals
-
1-SINTCS/2
Adaptation chuck from 2.35mm to 1.60mm for the electric motor of the MTS3000-Restan system
-
1-SINTCB/2
Adaptation chuck from 3.00mm to 2.35mm for the electric motor of the MTS3000-Restan system
-
1-MX1615B
HBK QuantumX 16-channel bridge amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX1615B amplifier (16 channels), 20 connectors (1-CON-S1015), power supply (1-NTX001) and accessories.
-
Internal Pipe Air Turbine Slide with Digital Microscope
Automatic version of the MTS3000-Restan system with air turbine internal pipe drilling slide and digital microscope for hole drilling residual stress measurements on metallic materials
-
1-EVAL/PRO
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PROFESSIONAL version) with USB protection key
-
1-SINTCTT4/4
Package of inverted cone endmills with coating for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for metallic materials