- Display 45 Products per page
-
1-SINT/SLIDE3
Drilling slide of the MTS3000-Restan system using electric motor for composite materials
-
1-MX440B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX440B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-SINTCB/2
Adaptation chuck from 3.00mm to 2.35mm for the electric motor of the MTS3000-Restan system
-
1-RY61-1.5/120K3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
1-SINTD2/1
Package of inverted cone drill bits with diamond coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
1-RY61-1.5/120R3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
NI9219 + cDAQ9181
National Instrument 4-channels Universal Analog Input Module with CompactDAQ Chassis (1 Slot, Ethernet connection). Fully automatic acquisition using the RSM software.
Kit composed by the National Instrument acquisition board NI9219 (4 channels), cDAQ-9118 Ethernet chassis, 4 connection adapters (quarter bridge), power supply and accessories.
-
1-SINT/NETBOOK-MTS
Netbook PC configured and costumized with the MTS3000-Restan system’s software (with accessories).
-
1-EVAL/ULT
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (ULTIMATE version) with USB protection key
-
1-RY61-1.5/120R
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with soldering pads.
Contents for package: 5 pieces.
-
1-EVAL/BASIC
USB Memory stick containing the EVAL 7 software for the calculation of the residual stress by the hole drilling method (BASIC version) with USB protection key
-
1-MX840B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX840B amplifier (8 channels), 8 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-SINT/SLIDE5
Drilling slide of the MTS3000-Restan system using air turbine for internal pipes measurements.
-
1-SINT/SLIDE2
Drilling slide of the MTS3000-Restan system using electric motor for polymeric materials
-
Manual Air Turbine Slide with Optical Microscope
Entry-level cost-effective version of the MTS3000-Restan system with air turbine drilling slide and optical microscope for hole drilling residual stress measurements on metals
-
1-SGKIT
Strain gage installation kit including the required tools for the application of the strain gages for hole drilling measurments.
-
1-SINT/PC-MTS
Custom PC configured and costumized with the MTS3000-Restan system’s software (with accessories)
-
1-SINT/ELE-PRO
Electronic device for the MTS3000-Restan system with the RSM control software (PROFESSIONAL version)
-
Internal Pipe Air Turbine Slide with Digital Microscope
Automatic version of the MTS3000-Restan system with air turbine internal pipe drilling slide and digital microscope for hole drilling residual stress measurements on metallic materials
-
1-RY61-1.5/120K
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 3soldering pads
Contents for package: 5 pieces.
-
1-SINT/ELE-BASIC
Electronic device for the MTS3000-Restan system with the RSM control software (BASIC version)
-
1-SINTCTT2/4
Package of inverted cone endmills with coating for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for metallic materials
-
Electric Motor for Metals with Optical Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and optical microscope for hole drilling residual stress measurements on metals
-
1-MX410B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software
The kit is composed by the HBK QuantumX MX410B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-EVAL/ENT
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (ENTERPRISE version) with USB protection key
-
1-SINTUP/LVDT
Upgrade of the MTS3000-Restan system using an LVDT sensor (with accessories and connection cables)
-
1-FEET
Package of replacement standard magnetic feet of the MTS3000-Restan system
Contents for package: 3 pieces.
-
1-EVAL/PRE
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PREMIUM Version) with USB protection key
-
LC-SG-120
Package of Low-Cost strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 2 wires connection cables (1.0 m)
Contents for package: 5 pieces.
-
Electric Motor for Polymers with Optical Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and optical microscope for hole drilling residual stress measurements on polymerics
-
1-SINTCS/2
Adaptation chuck from 2.35mm to 1.60mm for the electric motor of the MTS3000-Restan system
-
1-SGCABLES-NI
Package of additional cables with quarter bridge completion for National Instrument NI9219 strain gage amplifier
Contents for package: 4 pieces
-
Electric Motor for Composites with Optical Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and optical microscope for hole drilling residual stress measurements on composites
-
FRS-2-23-1LJBT
Package of TML strain gage rosette for hole drilling measurements with 3 grids, circular layout with 3 wires connection cables (1.0 m)
Contents for package: 10 pieces.
