- Display 45 Products per page
-
1-SINT/SLIDE5
Drilling slide of the MTS3000-Restan system using air turbine for internal pipes measurements.
-
FRS-3-11-1LJBT
Package of TML strain gage rosette for hole drilling measurements with 3 grids, circular layout with 3 wires connection cables (1.0 m)
Contents for package: 10 pieces.
-
1-FEET
Package of replacement standard magnetic feet of the MTS3000-Restan system
Contents for package: 3 pieces.
-
LC-SG-120
Package of Low-Cost strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 2 wires connection cables (1.0 m)
Contents for package: 5 pieces.
-
1-SGCABLES-NI
Package of additional cables with quarter bridge completion for National Instrument NI9219 strain gage amplifier
Contents for package: 4 pieces
-
1-SINTUP/LVDT
Upgrade of the MTS3000-Restan system using an LVDT sensor (with accessories and connection cables)
-
Air Turbine Slide with Digital Microscope
Automatic version of the MTS3000-Restan system with air turbine drilling slide and digital microscope for hole drilling residual stress measurements on metallic materials
-
1-EVAL/ENT
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (ENTERPRISE version) with USB protection key
-
1-SINT/PC-MTS
Custom PC configured and costumized with the MTS3000-Restan system’s software (with accessories)
-
1-RY61-1.5/120K3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
1-SINTD1/1
Package of inverted cone drill bits with diamond coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of small size
-
NI9219 + cDAQ9181
National Instrument 4-channels Universal Analog Input Module with CompactDAQ Chassis (1 Slot, Ethernet connection). Fully automatic acquisition using the RSM software.
Kit composed by the National Instrument acquisition board NI9219 (4 channels), cDAQ-9118 Ethernet chassis, 4 connection adapters (quarter bridge), power supply and accessories.
-
1-MX410B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software
The kit is composed by the HBK QuantumX MX410B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-SINT/ELE-BASIC
Electronic device for the MTS3000-Restan system with the RSM control software (BASIC version)
-
1-SINTCB/2
Adaptation chuck from 3.00mm to 2.35mm for the electric motor of the MTS3000-Restan system
-
1-SINTCTT4/4
Package of inverted cone endmills with coating for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for metallic materials
-
1-SINTCT2/1
Package of inverted cone endmills for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
1-EVAL/PRO
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PROFESSIONAL version) with USB protection key
-
1-MX840B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX840B amplifier (8 channels), 8 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
EA-06-031-RE120
Package of MM – Vishay strain gage rosette for hole drilling measurements with 3 grids, circular layout with soldering pads.
Contents for package: 5 pieces.
-
1-MX440B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX440B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
Manual Air Turbine Slide with Optical Microscope
Entry-level cost-effective version of the MTS3000-Restan system with air turbine drilling slide and optical microscope for hole drilling residual stress measurements on metals
-
1-SINTCT1/2
Package of inverted cone endmills for the electric motor of the MTS3000-Restan system for strain gage rosettes of small size for polymeric and composite materials
-
1-SGCABLES-MX
Package of additional cables with quarter bridge completion for HBK QuantumX MX440B and MX840B strain gage amplifier
Contents for package: 4 pieces
-
1-EVAL/PRE
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PREMIUM Version) with USB protection key
-
Internal Pipe Air Turbine Slide with Digital Microscope
Automatic version of the MTS3000-Restan system with air turbine internal pipe drilling slide and digital microscope for hole drilling residual stress measurements on metallic materials
-
1-RY61-1.5/120R3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
Electric Motor for Polymers with Digital Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and digital microscope for hole drilling residual stress measurements on polymeric materials
-
FRS-2-23-1LJBT
Package of TML strain gage rosette for hole drilling measurements with 3 grids, circular layout with 3 wires connection cables (1.0 m)
Contents for package: 10 pieces.
-
1-RY61-1.5/120K
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 3soldering pads
Contents for package: 5 pieces.
-
1-SINTCT1/1
Package of inverted cone endmills for the air turbine of the MTS3000-Restan system for strain gage rosettes of small size
-
Electric Motor for Metals with Digital Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and digital microscope for hole drilling residual stress measurements on metallic materials
-
1-SINT/SLIDE3
Drilling slide of the MTS3000-Restan system using electric motor for composite materials
-
1-SINTCT2/2
Package of inverted cone endmills for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for polymeric and composite materials
-
1-SINT/NETBOOK-MTS
Netbook PC configured and costumized with the MTS3000-Restan system’s software (with accessories).