- Display 45 Products per page
-
1-SINTCTT2/4
Package of inverted cone endmills with coating for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for metallic materials
-
1-EVAL/ULT
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (ULTIMATE version) with USB protection key
-
1-RY61-1.5/120K3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
1-SINTCT1/2
Package of inverted cone endmills for the electric motor of the MTS3000-Restan system for strain gage rosettes of small size for polymeric and composite materials
-
1-RY61-3.2/120S
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with soldering pads
Contents for package: 5 pieces.
-
1-SINT/SLIDE2
Drilling slide of the MTS3000-Restan system using electric motor for polymeric materials
-
NI9219 + cDAQ9181
National Instrument 4-channels Universal Analog Input Module with CompactDAQ Chassis (1 Slot, Ethernet connection). Fully automatic acquisition using the RSM software.
Kit composed by the National Instrument acquisition board NI9219 (4 channels), cDAQ-9118 Ethernet chassis, 4 connection adapters (quarter bridge), power supply and accessories.
-
1-MX1615B
HBK QuantumX 16-channel bridge amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX1615B amplifier (16 channels), 20 connectors (1-CON-S1015), power supply (1-NTX001) and accessories.
-
Electric Motor for Polymers with Optical Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and optical microscope for hole drilling residual stress measurements on polymerics
-
1-RY61-1.5/120K
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 3soldering pads
Contents for package: 5 pieces.
-
1-SINT/ELE-PRO
Electronic device for the MTS3000-Restan system with the RSM control software (PROFESSIONAL version)
-
1-EVAL/PRO
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PROFESSIONAL version) with USB protection key
-
1-SINTCS/2
Adaptation chuck from 2.35mm to 1.60mm for the electric motor of the MTS3000-Restan system
-
FRS-3-23-1LJBT
Package of TML strain gage rosette for hole drilling measurements with 3 grids, circular layout with 3 wires connection cables (1.0 m)
Contents for package: 10 pieces.
-
EA-06-031-RE120
Package of MM – Vishay strain gage rosette for hole drilling measurements with 3 grids, circular layout with soldering pads.
Contents for package: 5 pieces.
-
Air Turbine Slide with Digital Microscope
Automatic version of the MTS3000-Restan system with air turbine drilling slide and digital microscope for hole drilling residual stress measurements on metallic materials
-
Electric Motor for Composites with Optical Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and optical microscope for hole drilling residual stress measurements on composites
-
1-SINT/SLIDE1
Drilling slide of the MTS3000-Restan system using air turbine high speed drilling for metal materials
-
1-MX440B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX440B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
Electric Motor for Metals with Optical Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and optical microscope for hole drilling residual stress measurements on metals
-
1-SINTUP/LVDT
Upgrade of the MTS3000-Restan system using an LVDT sensor (with accessories and connection cables)
-
1-SINT/NETBOOK-MTS
Netbook PC configured and costumized with the MTS3000-Restan system’s software (with accessories).
-
Electric Motor for Polymers with Digital Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and digital microscope for hole drilling residual stress measurements on polymeric materials
-
1-SINTCTT4/4
Package of inverted cone endmills with coating for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for metallic materials
-
Electric Motor for Composites with Digital Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and digital microscope for hole drilling residual stress measurements on composite materials
-
1-SINTCB/2
Adaptation chuck from 3.00mm to 2.35mm for the electric motor of the MTS3000-Restan system
-
1-SINTD1/1
Package of inverted cone drill bits with diamond coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of small size
-
1-MX840B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX840B amplifier (8 channels), 8 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-SINTCT2/2
Package of inverted cone endmills for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for polymeric and composite materials
-
1-SINTCTT1/1
Package of inverted cone endmills with coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of small size
-
1-SINTCTT2/1
Package of inverted cone endmills with coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
1-MX410B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software
The kit is composed by the HBK QuantumX MX410B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-EVAL/PRE
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PREMIUM Version) with USB protection key
-
LC-SG-120
Package of Low-Cost strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 2 wires connection cables (1.0 m)
Contents for package: 5 pieces.
-
Internal Pipe Air Turbine Slide with Digital Microscope
Automatic version of the MTS3000-Restan system with air turbine internal pipe drilling slide and digital microscope for hole drilling residual stress measurements on metallic materials
-
1-EVAL/BASIC
USB Memory stick containing the EVAL 7 software for the calculation of the residual stress by the hole drilling method (BASIC version) with USB protection key
-
1-SINT/SLIDE3
Drilling slide of the MTS3000-Restan system using electric motor for composite materials
-
1-RY61-1.5/120S
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, circular layout with soldering pads
Contents for package: 5 pieces.
-
Air Turbine Slide with Optical Microscope
Automatic version of the MTS3000-Restan system with air turbine drilling slide and optical microscope for hole drilling residual stress measurements on metals
-
1-SINTCT2/1
Package of inverted cone endmills for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
1-SINT/PC-MTS
Custom PC configured and costumized with the MTS3000-Restan system’s software (with accessories)
