- Display 45 Products per page
-
1-EVAL/PRE
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PREMIUM Version) with USB protection key
-
1-RY61-1.5/120R3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
1-SGCABLES-MX
Package of additional cables with quarter bridge completion for HBK QuantumX MX440B and MX840B strain gage amplifier
Contents for package: 4 pieces
-
1-SINTCTT2/4
Package of inverted cone endmills with coating for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for metallic materials
-
Internal Pipe Air Turbine Slide with Digital Microscope
Automatic version of the MTS3000-Restan system with air turbine internal pipe drilling slide and digital microscope for hole drilling residual stress measurements on metallic materials
-
1-EVAL/PRO
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (PROFESSIONAL version) with USB protection key
-
Manual Air Turbine Slide with Optical Microscope
Entry-level cost-effective version of the MTS3000-Restan system with air turbine drilling slide and optical microscope for hole drilling residual stress measurements on metals
-
1-SGCABLES-NI
Package of additional cables with quarter bridge completion for National Instrument NI9219 strain gage amplifier
Contents for package: 4 pieces
-
1-SINTUP/LVDT
Upgrade of the MTS3000-Restan system using an LVDT sensor (with accessories and connection cables)
-
Electric Motor for Composites with Optical Microscope
Automatic version of the MTS3000-Restan system with electric motor slide and optical microscope for hole drilling residual stress measurements on composites
-
1-MX410B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software
The kit is composed by the HBK QuantumX MX410B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-MX440B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX440B amplifier (4 channels), 4 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-SINTCTT2/1
Package of inverted cone endmills with coating for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size
-
1-RY61-1.5/120R
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with soldering pads.
Contents for package: 5 pieces.
-
1-FEET
Package of replacement standard magnetic feet of the MTS3000-Restan system
Contents for package: 3 pieces.
-
1-SGKIT
Strain gage installation kit including the required tools for the application of the strain gages for hole drilling measurments.
-
LC-SG-120
Package of Low-Cost strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 2 wires connection cables (1.0 m)
Contents for package: 5 pieces.
-
1-MX1615B
HBK QuantumX 16-channel bridge amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX1615B amplifier (16 channels), 20 connectors (1-CON-S1015), power supply (1-NTX001) and accessories.
-
1-RY61-1.5/120S
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, circular layout with soldering pads
Contents for package: 5 pieces.
-
1-SINT/ELE-BASIC
Electronic device for the MTS3000-Restan system with the RSM control software (BASIC version)
-
1-EVAL/ENT
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (ENTERPRISE version) with USB protection key
-
1-SINTCB/2
Adaptation chuck from 3.00mm to 2.35mm for the electric motor of the MTS3000-Restan system
-
1-SINT/ELE-PRO
Electronic device for the MTS3000-Restan system with the RSM control software (PROFESSIONAL version)
-
1-SINT/PC-MTS
Custom PC configured and costumized with the MTS3000-Restan system’s software (with accessories)
-
FRS-2-23-1LJBT
Package of TML strain gage rosette for hole drilling measurements with 3 grids, circular layout with 3 wires connection cables (1.0 m)
Contents for package: 10 pieces.
-
1-MX840B
HBK QuantumX 4-channel universal amplifier, compact size, easy to operate and configure. Fully automatic acquisition using the RSM software.
The kit is composed by the HBK QuantumX MX840B amplifier (8 channels), 8 connection adapters (quarter bridge), power supply (1-NTX001) and accessories.
-
1-SINT/SLIDE2
Drilling slide of the MTS3000-Restan system using electric motor for polymeric materials
-
1-EVAL/ULT
USB Memory stick containing EVAL 7 software for the calculation of the residual stress by the hole drilling method (ULTIMATE version) with USB protection key
-
1-SINT/SLIDE3
Drilling slide of the MTS3000-Restan system using electric motor for composite materials
-
1-SINTCS/2
Adaptation chuck from 2.35mm to 1.60mm for the electric motor of the MTS3000-Restan system
-
1-RY61-1.5/120K3
Package of HBK strain gage rosette for hole drilling measurements with 3 grids, rectangular layout with 4 wires connection cables (3 m)
Contents for package: 5 pieces.
-
1-SINTCT2/2
Package of inverted cone endmills for the electric motor of the MTS3000-Restan system for strain gage rosettes of standard size for polymeric and composite materials
-
1-SINTCT2/1
Package of inverted cone endmills for the air turbine of the MTS3000-Restan system for strain gage rosettes of standard size